7.0 inch IPS LCD display 800*1280 resolution optional touch MIPI
Interface
800×1280 ResolutionMIPI Interface350 Cd/m² Luminance-10℃ ~ +50℃ Operating TempAll-Direction Viewing Angle
Product Features
The YVO070HDM-H01 is a 7.0-inch (9:16 aspect ratio)
high-performance IPS TFT-LCD module developed . It adopts amorphous
silicon TFT as a switching device, consisting of a TFT LCD panel
and driving circuit, with a resolution of 800×RGB×1280 pixels and
support for rich color display. Featuring an IPS (Normally Black)
display mode and RGB vertical stripe pixel arrangement, it delivers
excellent color reproduction and all-direction viewing angles,
ensuring consistent visual effects from any perspective. Equipped
with a MIPI interface, it realizes high-speed serial data
transmission (supporting 4 data lanes), which is more efficient and
space-saving than traditional parallel interfaces, making it
suitable for smart terminals, portable devices, and multimedia
display scenarios. The module uses white LEDs as backlight,
achieving a typical luminance of 350 Cd/m² and a contrast ratio of
800:1, ensuring clear visibility in various light environments. It
complies with RoHS environmental standards, using lead-free
processes and environmentally friendly materials. With an operating
temperature range of -10℃ ~ +50℃ and storage temperature range of
-20℃ ~ +60℃, it can adapt to common working and storage conditions,
and the backlight has a typical service life of 20000 hours
(brightness decreasing to 50% of initial value at Ta=25℃, IF=80mA),
ensuring long-term stable use.
| Product | 7.0 inch IPS TFT-LCD Module | Module Number | YVO070HDM-H01 |
|---|
| Resolution | 800(H)×RGB×1280(V) pixels | Display Mode | IPS (Normally Black) |
|---|
| Brightness | 350 Cd/m² (Typ.) | Outline Dimensions (H×V×D) | 99.8(H)×161.05(V)×2.65(D)mm |
|---|
| Viewing Direction | All | Active Area (H×V) | |
|---|
| Interface | MIPI Interface (4 data lanes) | Storage Temp. | -20 ~ +60 °C |
|---|
| Backlight | White LED (Typ. IF=80mA) | Operating Temp. | -10 ~ +50 °C |
|---|
| Highlight | 7.0-inch IPS LCD, 800×1280 resolution, MIPI interface, RoHS
compliant |
|---|
Technical Drawing
The YVO070HDM-H01 LCD module ensures reliable electrical
performance. For power supply, the main power voltage (VCC) ranges
from 3.0V to 3.6V (Typ. 3.3V), and the I/O power voltage (IOVCC) is
1.7V to 2.0V (Typ. 1.8V); absolute maximum ratings must not be
exceeded (VCC/IOVCC: -0.3V~+3.6V, GND=0V), otherwise permanent
damage to the module may occur. The power-on sequence requires
strict compliance: VCCD, IOVCC, VCCH → VCI, VCIP (interval ≥5ms) →
HW Reset (≥5ms) → Send SLPOUT command (Pagu0_0x11) → Initial
setting → Video Packet transmission, with a total power-on
preparation time (tPWON) of 5ms; power-off sequence follows the
reverse order to avoid latch-up or component damage. In terms of
MIPI interface timing, the high-speed (HS) mode supports
differential small-amplitude signals, with a maximum total bit rate
of 2Gbps for 4 data lanes (24-bit data format), ensuring efficient
data transmission for high-resolution display.
For the backlight unit (Ta=25℃), the typical forward current (IF)
is 80mA, forward voltage (VF) ranges from 15V to 17.5V (Typ. 16V),
and luminance is 300-350 Cd/m² (IF=80mA). It is important to note
that if the LED operating current exceeds 80mA, the backlight
service life will be shortened; the service life is defined as the
time when brightness decreases to 50% of the initial value under
standard conditions. In terms of display timing, for 800×1280
resolution, the vertical refresh rate (VRR) is typically 60Hz,
vertical active area (VDISP) is 1280 lines, vertical blanking
period (VBK) is 8-250 lines; for 720×1280 resolution, the
horizontal active area is 720 DCK, pixel clock is 56.88-74.17MHz,
ensuring stable image output without flicker. The module also
supports image inversion functions (UP/DOWN and LEFT/RIGHT), which
can be adjusted according to application scenarios to meet
different installation and viewing needs.
PIN Definition| PIN | Symbol | Description |
|---|
| 1 | LEDA | Power for LED backlight (Anode) |
| 2 | LEDA | Power for LED backlight (Anode) |
| 3 | LEDA | Power for LED backlight (Anode) |
| 4 | NC | No connect. |
| 5 | LEDK | Power for LED backlight (Cathode) |
| 6 | LEDK | Power for LED backlight (Cathode) |
| 7 | LEDK | Power for LED backlight (Cathode) |
| 8 | LEDK | Power for LED backlight (Cathode) |
| 9 | GND | Ground |
| 10 | GND | Ground |
| 11 | MIPI_D2+ | HSSI_D2_P are differential small amplitude signals. |
| 12 | MIPI_D2- | HSSI_D2_N are differential small amplitude signals. |
| 13 | GND | Ground |
| 14 | MIPI_D1+ | HSSI_D1_P are differential small amplitude signals. |
| 15 | MIPI_D1- | HSSI_D1_N are differential small amplitude signals. |
| 16 | GND | Ground. |
| 17 | MIPI_CLK+ | HSSI_CLK_P are differential small amplitude signals |
| 18 | MIPI_CLK- | HSSI_CLK_N are differential small amplitude signals |
| 19 | GND | Ground. |
| 20 | MIPI_D0+ | HSSI_D0_P are differential small amplitude signals. |
| 21 | MIPI_D0- | HSSI_D0_N are differential small amplitude signals. |
| 22 | GND | Ground. |
| 23 | MIPI_D3+ | HSSI_D3_P are differential small amplitude signals. |
| 24 | MIPI_D3- | HSSI_D3_N are differential small amplitude signals. |
| 25 | GND | Ground. |
| 26 | NC | |
| 27 | RESET | Reset signal |
| 28 | NC | |
| 29 | VDD1V8 | I/O power supply |
| 30 | VDD3V3 | Power supper 3.0-3.6 V |
| 31 | VDD3V3 | Power supper 3.0-3.6 V |
Product Application Scenario
The YVO070HDM-H01 7.0-inch (9:16 aspect ratio) IPS LCD module,
featuring 800×RGB×1280 resolution, 350 Cd/m² luminance, 800:1
contrast ratio, MIPI interface, and a working temperature range of
-10℃~+50℃, is widely applied in various scenarios: it serves as a
display for smart portable devices (such as handheld industrial
scanners and small-sized tablets) to show scanned data and
operation interfaces, leveraging its compact size
(99.8×161.05×2.65mm) for easy integration and MIPI high-speed
transmission for smooth data display; it is used in in-vehicle
infotainment sub-screens and rear-seat entertainment terminals to
present navigation tips and multimedia content, with its IPS
all-direction viewing angle ensuring clear visibility for
passengers and RoHS compliance meeting automotive environmental
standards; it works as a display for medical home monitoring
devices (like portable blood pressure monitors and oxygen
concentrators) to show health data, maintaining stable performance
via strict reliability tests (high-temperature/humidity operation
and thermal cycling) and ensuring accurate data presentation with
its 16.7M color reproduction; it is also applied to smart home
control panels (such as central lighting and curtain controllers)
to display environmental parameters and support touch control, with
its 20000-hour backlight lifespan meeting long-term home use needs
and image inversion function (UP/DOWN, LEFT/RIGHT) adapting to
different installation orientations.
Customization OptionsThe YVO070HDM-H01 offers multiple customization options to meet diverse application
needs:
FPC Design: Flexible layout and connector type can be adjusted to fit system
requirements.
Cover Glass: Size, thickness, shape, and surface printing (logo, pattern) can
be customized.
Brightness: Adjustable from 200–1000 nits for indoor or outdoor use.
Touch Options: With or without capacitive touch, customized driver IC available.
